A bobber or mini planer board slip rigged with bobber stop beads is used as depth finder and then to control the minimum and maximum lure depth. They Snap-On and Pop-Off your line and can be slid up or down the line to adjust depth range. They are buoyancy neutral and Reusable. DimensionsSmall 1/8" x 5/16")(Medium 3/16" x 7/16")(Large 1/4" x 7/8")

3 different packages $10 each
Size-Quantity-Options
30 small 15 white glow & 15 hot pink
20 Medium 10 white glow & 10 hot pink
6 Large 3 white glow & 3 hot pink"

Dimensions (Small 1/8" x 5/16")(Medium 3/16" x 7/16")(Large 1/4" x 7/8")



How it works as a depth finder? Cast out and watch the upper bead to see if it moves (slips) all the way to the bobber. If it does, the water is deeper and the bead needs to be slid further up the line. If you see the bead stop 6? short of reaching the bobber you can move it 12? and you will be fishing 6? off the bottom. Using the BulletBobber?s side planer action you can virtually map out the depth of a large area with just one cast. Generally, it makes sense if you can zero in on the depth the fish are hitting to slide the beads closer together but not all the way. You can move them tight against both sides of the BulletBobber but preferably leave some slack to allow for some vertical jigging.



For more unique fishing items see my eBay listings http://www.ebay.com/usr/bulletbobber